Altusen KA9233, Руководство пользователя

Страница: 48 / 99

KA9233 User Manual
34
Invoking Auto Scan
To start Auto Scanning, key in the following hotkey combination:
1. Invoke Hotkey mode (see page 31).
2. Press [A].
After you press A , you automatically exit Hotkey mode, and enter Auto
Scan mode, and Auto Scanning begins.
Š While you are in Auto Scan mode, you can pause the scanning in order
to keep the focus on a particular port either by pressing
P or with a left-
click of the mouse. During the time that Auto Scanning is paused, the
command line displays:
AUTOSCAN PAUSED
Pausing and exiting are the two ways to stop scanning and keep the
focus on a particular port. If you intend to continue scanning after a
brief stop, pausing is more convenient than exiting Auto Scan mode
completely.
This is because when you resume scanning after pausing, you start
from where you left off. On the other hand, if you exit and then restart
Auto Scan mode, you start over from the very first port on the
installation.
To resume Auto Scanning after you pause, press any key or left-click.
Scanning continues from where it left off.
Š
While you are in Auto Scan mode, you can press the arrow keys to skip
through the OSD list:
After the amount of time set with the Scan Timer elapses, Auto Scan
mode will switch to the next port.
Š
While Auto Scan mode is in effect, ordinary keyboard and mouse
functions are suspended
—
only Auto Scan mode compliant keystrokes
and mouse clicks can be input. You must exit Auto Scan mode in order
to regain normal control of the KVM console.
←
Switches to the previous port in the OSD list.
→
Switches to the next port in the OSD list.
↑
Switches to the first port in the OSD list.
↓
Switches to the last port in the OSD list.