manualshive.com logo in svg

Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 92 / 271

Поделиться
Скачать
Altusen ALTUSEN CC2000 Скачать руководство пользователя страница 92

CC2000 User Manual

78

Devices

The Devices menu has three Panel Menu items: Devices, Tools, and Device 
Sync. Its default page is the main page of the Devices Panel Menu. The 

Devices

 

Panel Menu is discussed in the following section; the 

Tools

 Panel Menu is 

discussed on page 100; the 

Device Sync

 Panel Menu is discussed on page 102.

Devices

The Devices Panel Menu is used to add, modify, delete, and organize devices 
and device folders. All device items that have been configured for use on the 
CC2000 server and have been added into its database are listed in the Sidebar.

On Master units, device types that can be added and configured are found under 
the 

Add

 drop down list at the top of the main panel.

Note:

The drop down list is only active on Master units, since devices can only 
be added into the CC2000 management system from Master units. For 
Slave units, clicking the Show Available Devices button lists the 
devices connected to them that can be recognized.

The device types, and an explanation of their purposes are given in the 
following table:

Type

Purpose

Device

Select this type to add ATEN/ALTUSEN NET™devices into the 
CC2000 management system. See

CC2000 Capable ALTUSEN/

ATEN IP Products

, page 199 for details.

Note: 

When devices are added all of their ports are locked by 

default and must be unlocked. See

Locking / Unlocking Ports

, 

page 99 for details. This allows you to add devices containing ports 
beyond the number allowed by the license. You can then select 
specific ones to unlock – thereby gaining access to critical ports 
while remaining within the license restrictions.

cc2k.book  Page 78  Tuesday, December 21, 2010  4:00 PM

Содержание ALTUSEN CC2000
















































































































































































































































































Отзывы:

Нет отзывов