Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 114 / 271

CC2000 User Manual
100
Tools
When you click Tools on the Panel Menu bar, the following page comes up:
Clicking an icon performs a specific task. The task that each of the icons
performs is described in the table, on the next page.
Icon Task
Broadcast IP address and port number to the devices: Before a device
can communicate with the CC2000, its ANMS settings have to specify the
CC2000’s IP address and device management port number. Clicking this icon
causes the CC2000 to broadcast its IP address and device management port
number to the devices connected to it on its network, which automatically sets
them on the devices (instead of having to set them manually on the device,
itself). This is done the first time that you connect a device to the CC2000
network, or if a device has been reset to its default settings.
Note: 1. This function uses UDP to broadcast the information. Therefore the
devices must be on the same network segment (VPN will not work).
UDP uses port 18768 – make sure that the network settings for
computers that the CC2000 is installed on have this port open.
2. For heightened security, once the broadcast is done and the
information has been sent to the device, the device will not accept
UDP broadcasts from any other CC2000.
3. If you change CC2000s, you must use the ANMS settings page to
specify the IP Address and port number (see Device Configuration
(For KVM Devices) , page 110).
Broadcast changed IP address and port number to the devices: This
feature is used when the CC2000’s IP address and/or device management
port number changes. Clicking this icon causes the CC2000 to broadcast its
new IP address and/or device management port number to the devices
connected to it on its network – automatically updating their ANMS settings
accordingly.
Note: 1. This function uses UDP to broadcast the information. Therefore the
devices must be on the same network segment (VPN will not work).
2. For heightened security, the receiving devices will only accept UDP
broadcasts from the CC2000 that originally initialized them.
cc2k.book Page 100 Tuesday, December 21, 2010 4:00 PM