Altusen ALTUSEN CC2000 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 271

Altusen ALTUSEN CC2000 Скачать руководство пользователя страница 22

CC2000 User Manual

8

Licenses

The CC2000 license controls the number of slave servers and nodes permitted
on the CC2000 server installation. License information is contained on the
USB License Key that came with your CC2000 purchase.

Upon completion of the CC2000 server software installation, a default license
for one master (no slaves), and 16 nodes is automatically provided. To add
anything more (slave servers and nodes), you must upgrade the license.
See

Upgrading the License

, page 157, for detailed information.

Nodes

A node can either be a physical port, or an aggregate device. Each node
requires a license.

Aggregate devices can be created when a device (router, server, ethernet
switch, etc.,) managed through the CC2000 is capable of being accessed
through several ATEN/ALTUSEN NET™ ports. By consolidating those
ports into a single Aggregate Device, the Aggregate Device counts as a
single node, and only requires a single license.

Ports on ATEN/ALTUSEN NET™ devices, when not part of an aggregate
device, must be unlocked (see

Locking / Unlocking Ports

order to be used. Each unlocked port counts as one node.

Generic devices (routers, switches, etc.) are not counted.

Direct Web Access devices are not counted.

Group Devices do not count as nodes. They are made up of unlocked
physical ports that are grouped together. The same physical port can be
added to more than one Group device, but it only requires one node license
no matter how many Group devices it is added to.

Like Group Devices, Folders do not count as nodes, however each
physical port within a folder counts as a node. In addition, each Aggregate
Device contained in a folder counts as one node.

Note:

, page 78 for detailed information on each of the device

categories.

Slaves

The license specifies how many slaves you can register with the master
CC2000. See

CC2000 Slave Servers

, page 21 for details regarding registering

a slave with a master.

cc2k.book Page 8 Tuesday, December 21, 2010 4:00 PM

«
...
20
21
22
23
24
...
»

Содержание ALTUSEN CC2000
















































































































































































































































































Отзывы:

Нет отзывов