Operation
7-1
Operation
7-2
To install the KN1000, refer to the installation diagrams (the numbers correspond to the numbers of
the steps), and do the following:
1. Ground the unit using the grounding wire provided with the KN1000 package.
2. Use the Console cable provided with this package to connect the KN1000’s Console port, to the
local console keyboard, monitor and mouse.
Note:
1. The Console cable comes with connectors for both PS/2 and USB mice and keyboards –
use the ones appropriate for your installation.
2. You can use any combination of keyboard and mouse connections. For example, you can
use a PS/2 keyboard with a USB mouse.
3. Use the KVM cable provided with this package to connect the KN1000’s PC/KVM port, to the
keyboard, video and mouse ports of the server or KVM switch that you are installing
4. (Optional) If you want to use the virtual media function, use the USB 2.0 Virtual Media Cable
provided with this package to connect a USB port on the server to the KN1000's Virtual Media
port.
5. (Optional) If you want to connect a PON device for remote power management, plug its cable into
the PON port.
6. (Optional) If you want to connect a serial console device or modem, plug its cable into the RS-232
port.
7. Plug the LAN or WAN cable into the KN1000's LAN port.
8. Use the outlet power cord provided with the KN1000 package to connect the KN1000’s Power
Outlet to the attached server for power management.
9. Use the power cord from the server to connect the KN1000’s Power Inlet to an AC power source.
10. Plug the power adapter cable into the KN1000's power jack, then plug the power adapter into an
AC power source.
This completes the hardware installation, and you are ready to start up.
Note:
When starting up, be sure to first power on the KN1000, then power on the server or KVM
switch.
The KN1000 can be accessed either from an internet type browser, via Windows and Java application
(AP) program, or by PPP modem dial-in.
Logging In
To operate the KN1000 from an Internet browser, begin by logging in:
1. Open your browser and specify the IP address of the KN1000 you want to access in the browser's
URL location bar.
Note:
For security purposes, a login string may have been set by the administrator. If so, you must
include a forward slash and the login string along with the IP address when you log in. For
example:192.168.0.100/ KN1000 If you don't know the IP address and login string, ask
your Administrator. The default IP address is 192.168.0.60
2. A Security Alert dialog box appears. Accept the certificate – it can be trusted. If a second certificate
appears, accept it as well.
Mouse Setup
If you use a PS/2 custom KVM cable to connect to the server, perform the following mouse setting
procedures.
Windows Systems:
Note:
You must use the generic mouse driver supplied with Windows.
• XP / Server 2003 -- middle position; Enhance pointer precision: off
• 2000 / ME -- Mouse motion: middle position; Acceleration: off
• NT / 98 / 95 -- Mouse speed: slowest
Sun / Linux Systems:
Open a terminal session and issue the following command:
• Sun: xset m 1
• Linux: xset m 0 or xset m1 (if one doesn’t work try the other.)
The KN1000 login page appears:
3. Provide a valid Username and Password (set by the KN1000 administrator), then click Login to
continue.
Note:
1. If you are the administrator, and are logging in for the first time, use the default Username:
administrator; and the default Password: password. For security purposes, we strongly
recommend you remove these and give yourself a unique Username and Password.
2. If you supplied an invalid login, the authentication routine will return this message: Invalid
Username or Password. Please try again. If you see this message, log in again being careful
with the Username and Password.
After you have successfully logged in, the KN1000 Main Screen appears
Specifications
8
Installation
7
1
Power Over the NET™
6
4
10
5
3
2
8
9
1
PN0108
Modem
Serial Console Device
(Router, Switch, Sunfire V100,....)
Function
KN1000
Connectors
Console
1 x SPHD-18 Male (Yellow)
KVM (Computer)
1 x SPHD-17 Female (Yellow)
PON
1
1 x DB-9 Male (Black)
RS-232
1 x DB-9 Male (Black)
LAN
1 x RJ-45 Female
Power Inlet
1 x IEC320 C14
Power Outlet
1 x IEC320 C13
Power
1 x DC Jack
Virtual Media
1 x USB Mini-B Female (Black)
Switches
Reset
1 x Semi-recessed pushbutton
LEDs
Power
1 (Orange)
Power Outlet
1 (Orange)
Link
1 (Green)
10/100 Mbps
1 (Orange/Green)
Emulation
Keyboard/Mouse
USB; PS/2
Video
1600 x 1200 @ 60 Hz; DDC2B
I/P Rating
100–240 V
AC; 50/60 Hz, 10A
Load Capacity
120V/1200W
; 230V/2300W
O/P Rating
100–240 V
AC; 50/60 Hz; 9A
DC Input Rating
DC5.3V
;2.4A
Power Consumption
DC5.3V
; 6.3W
Environment
Operating Temp.
0–40℃
Storage Temp.
-20–60℃
Humidity
0–80% RH Non-condensing
Physical Properties
Housing
Metal
Weight
0.86 kg
Dimensions (L x W x H)
30.85 x 8.15 x 4.20 cm
6
