Rack Mounting
For convenience and flexibility, the KN1000 can be mounted on a system rack.
To rack mount the unit do the following:
1. Remove the two original screws from the bottom of the unit (near the rear of the unit).
2. Using the screws provided with the rack mount kit, screw the mounting bracket into the KN1000 –
as shown in the diagram.
Note:
The illustrations show the mounting bracket attached to the bottom of the unit; it can also be
attached to the top.
3. Screw the bracket into any convenient location on the rack.
Note:
Rack screws are not provided. Use screws that are appropriate for your rack.
DIN Rail Mounting
To mount the KN1000 on a DIN rail:
1. Screw the mounting bracket to the back of the KN1000 as described in steps 1 and 2 of the
wall mounting procedure.
2. Use the larger screws supplied with the Rack Mount Kit to screw the DIN rail brackets to the
mounting bracket – as shown in the diagram.
3. Hang the unit on the DIN rail.
Package Contents
1
3
Hardware Review (Rear View)
The KN1000 package consists of:
1 KN1000
2 Custom KVM Cable Sets
1 Custom Console Cable Set
1 USB 2.0 Virtual Media Cable
1 Power Adapter
1 Grounding Wire
1 Outlet Power Cord
Hardware Installation
5
1. Circuit Breaker
2. Grounding Terminal
3. Power Inlet
4. Power Outlet
5. Power Jack
6. Virtual Media Port
7. PC/KVM Port
8. Console Port
9. PON Port
10. RS-232 Port
Remote User Computers
• For best results we recommend that the computers used to access the switch have at least a P III 1
GHz processor, with their screen resolution set to 1024 x 768.
• Browsers must support 128 bit SSL encryption.
• For best results, a network transfer speed of at least 128 kbps is recommended.
• For the Windows Client AP, at least 25 MB of memory must be available after installation.
• For the Java Client AP, the latest version of Sun's Java Runtime Environment (JRE) must be
installed, and at least 55 MB of memory must be available after installation.
• For the browser-based WinClient Viewer, at least 60 MB of memory must be available after
installation.
• For the browser-based Java Applet Viewer the latest version of Sun's Java Runtime Environment
(JRE) must be installed, and at least 130 MB of memory must be available after installation.
• For the Log Server, you must have the Microsoft Jet OLEDB 4.0 or higher driver installed.
Servers
The following equipment must be installed on these servers:
• A VGA, SVGA or multisync port
• For USB KVM Cable Connections: a Type A USB port and USB host controller
• For PS/2 KVM Cable Connections: 6-pin Mini-DIN keyboard and mouse ports
Cables
• Two custom KVM cable sets (1 USB; 1 PS/2) to link the KN1000 to a server or KVM switch are
provided with this package.
• One custom Console cable set to link the KN1000 to a local console is provided with this package.
Note:
This cable set has been designed to operate with either PS/2 or USB consoles.
• A USB 2.0 cable for use with the Virtual Media function is provided with this package.
• Cat 5e or higher Ethernet cable (not provided with this package), should be used to connect the
KN1000 to the LAN, WAN, or Internet.
• One power cables to connect the KN1000 to the server for power management functionality is
provided with this package.
KN1000 KVM Over the NET™
Quick Start Guide
Requirements
4
1 Rack Mount Kit
1 Software CD
1 User Instructions
1. LAN Port
2. Firmware Upgrade / Reset Switch
3.10/100Mbps LED
4. Link LED
5. Power LED
6. Power Outlet LED
Hardware Review (Front View)
2
1
2 3 4 5
6
1 2
3
4
5 6
7
8
9
10
Phillips hex head
M3 x 8
© Copyright 2011 ATEN
®
International Co., Ltd. www.aten.com
Altusen and the Altusen logo are trademarks of ATEN International Co., Ltd.
All rights reserved. All other trademarks are the property of their respective owners.
This product is RoHS compliant
PAPE-1215-800G Printing Date: 11/2011
Patent No.
All information, documentation, and specifications contained in this media are subject to change without prior notification by the manufacturer.
Please visit our website to find the most up to date version.
TW I273415
TW 199673
TW 203183
US 7142721
US 7350091
US 7472217
US 7340556
US 6957287
JP 4558319
JP 4651633
CN ZL 02129894.7
CN ZL 02824593.8
Online Registration
International:
• http://support.aten.com
North America:
• http://www.aten-usa.com/product_registration
Technical Phone Support
International:
• 886-2-8692-6959
China:
• 86-10-5255-0110
Japan:
• 81-3-5615-5811
Korea:
• 82-2-467-6789
North America:
• 1-888-999-ATEN Ext: 4988
United Kingdom:
• 44-8-4481-58923
