4. INSTALLATION
Figure 47: Rack fixation – Side covers
4.2.1.3.
Removal
To remove the rack, it’s necessary to execute the inverse process described on the Assembly subtitle.
4.2.2.
Module Insertion
The following example shows a Nexto Series generic module, this procedure must be followed for any Nexto Series
module.
First the module lower part, which is used as a guide for the correct insertion, must be fit in the backplane rack, and then
the guide pins are correctly placed in the right rack keyways for a specified position. Modules that use only one position in the
rack has only one guide pin. The figure below shows how the module lower part must be positioned in relation to the rack for
the correct insertion.
Figure 48: NX3010 and Backplane Rack
After fitting the module lower part as described above, a rotation movement must be executed in order to fit the fixation
lock in the rack upper part, as shown on figure below.
47
