ALTUS AL24L 4950 4B, Руководство пользователя

Страница: 92 / 175

34 / 58 TR
Television / User Manual
TIME SETTINGS
--------------------------------------------------------------------------------------------------
1 Press » MENU « to open the menu.
2
Select the »TIME« menu using »
<
« or »
>
«
and confirm your selection with »
OK
«.
– The »TIME« menu is now enabled.
Move
TIME
Back Select Exit
Time 13/April 13:18
Time Zone GMT+2
Sleep Timer Off
Auto Standby 4H
Sleep timer for OSD menu 30 S
Note:
7
Additional operations are explained in the
following sections.
Time
Current time and date information is retrieved
automatically from the broadcast.
Time Zone
1 Select »Time Zone« using »
V
« or »
Λ
« and
confirm with » OK «.
2
Select the time zone using »
V
«, »
Λ
«, »
<
«
or »
>
« and confirm your selection with
»
OK
«.
3 Press » EXIT « to finish setting.
Sleep timer
You can enter an off time for the television to
switch off. After this time has elapsed, the televi-
sion switches to standby mode.
1 Select »Sleep Timer« using »
V
« or »
Λ
«
and confirm with » OK «.
2
Select the sleep timer using »
V
« or »
Λ
«
and confirm with »
OK
«.
Note:
7
Disable the function with »
V
« or »
Λ
« by
switching it to »Off« position.
3
Press »
EXIT
« to finish the setting.
Auto standby
This function will switch the television to stand-
by mode in 4 hours if the television does not
receive any picture signals for 5 minutes or ac-
cording to European regulations, if no key on
the keyboard of the TV or the remote control is
pressed.
1
Select »Auto Standby« using »
V
« or »
Λ
«
and confirm with »
OK
«.
2 Select the sleep timer using »
V
« or »
Λ
«
and confirm with » OK «.
Note:
7
You can disable the function with »
V
« or
»
Λ
« by switching it to »Off« position.
3 Press » EXIT « to finish the setting.
Sleep timer for OSD menu
This function allows you to specify the time dur-
ing which the OSD menu will remain on the
screen.
1 Select »Sleep timer for OSD menu« using
»
V
« or »
Λ
« and confirm with » OK «.
2
Select the sleep timer using »
V
« or »
Λ
«
and confirm with »
OK
«.
3 Press » EXIT « to finish the setting.