- 4 -
Trove2KA2 / Trove3KA3
Keyscan
CA250B,
CA4500B,
CA8500B
Keyscan
DPS15
Keyscan
DPS15
Keyscan
CIM
Keyscan
OCB8
Keyscan
OCB8
Keyscan
CA250B,
CA4500B,
CA8500B
Keyscan
CIM
Keyscan
OCB8
Keyscan
OCB8
Altronix
Power Supply or
Sub-Assembly
Altronix
Sub-
Assembly
Altronix
Power Supply or
Sub-Assembly
Altronix
Power Supply or
Sub-Assembly
Altronix
Sub-Assembly
Altronix
Sub-Assembly
Altronix
T16175
Metal Spacer Placement
Locknut
Locknut
Metal Spacer Placement
Metal Spacer Placement
TKA3: Configuration of Altronix Power Supply
and/or Sub-Assembly Boards and Keyscan Boards
1. Fasten metal and snap on spacers (provided) to pems which match the hole pattern for Altronix Power Supply/Chargers or Altronix
Sub-Assembly boards (Fig. 3, 3a, pg. 4).
Note: Please fasten metal and snap on spacers in the proper locations (Fig. 3, pg. 4).
2. Mount boards to spacers utilizing 5/16” pan head screws (provided) (Fig. 3, pg. 4).
3. Mount Altronix T16175 transformer to backplane using four locking nuts and TKA3BK: tighten top two lock nuts first, then, utilizing
the TKA3BK bracket, insert pems through T16175 feet and backplane and tighten locknuts to the pems protruding through the
backplane.
(Fig. 3b, pg. 4).
4. Mount appropriate Keyscan boards into the correct positions (Fig. 3, pg. 4) by postioning spacers over appropriate holes on the
backplane and depress down on board to secure spacer to the backplane (Fig. 3c, pg. 4).
5. Fasten backplane to Trove3 enclosure utilizing pan head screws (provided).
Fig. 3
Plastic Spacer
pre-mounted into
Keyscan modules
Insert into
TKA2 or
TKA3 backplane
TKA3
Lock Nut
Mounting
Hole
Mounting Bracket
Terminals
T16175
Nylon or
Metal
Spacer
Sub-Assembly
Backplane
Pem
Fig. 3a
Fig. 3b
Fig. 3c
