- 2 -
NetWay112
Fig. 1
NetWay112 Port Status and LED Flash Codes
Port Status
Flash Code
Flash Pattern
Non-Powered Device
0
Ω
< RPORT < 200
Ω
OFF
LED OFF
Port Open RPORT > 1M
Ω
OFF
LED OFF
Port On 25k
Ω
ON
LED ON
Low Signature Resistance
300
Ω
< RPORT < 15k
Ω
1 Flash
Z
l l l
Z
l l l
Z
l l l
High Signature Resistance
33K
Ω
< RPORT < 500k
Ω
2 Flashes
Z Z
l l
Z Z
l l
Z Z
l l
Port Overload Fault
5 Flashes
l l l l
Z Z
Z Z Z
l l l l
Installing a NetWayXT/NetWayXTX repeater module:
NetWayXT will work only with PoE devices.
NetWayXTX will work with PoE/PoE+ devices.
1. Mount NetWayXT/NetWayXTX in desired location utilizing the mounting hole (Fig. 4, pg. 3). Use
a proper fastener and/or wall anchor when securing NetWayXT/NetWayXTX to the wall.
2. Connect structured cable from port marked [OUT] on NetWay112 to port marked [IN] on the
NetWayXT/NetWayXTX
(Fig. 4, pg. 3, Fig. 1b, pg. 3).
3. Connect structured cable from port marked [OUT] on NetWayXT/NetWayXTX to the PoE camera/
edge device or next NetWayXT/NetWayXTX repeater (Fig. 4, pg. 3).
4. Port status LEDs will illuminate on NetWayXT/NetWayXTX indicating the port is operational
(Fig. 4, pg. 3, refer to Port LED definitions on pg. 2).
5. Power LED will illuminate indicating 12VDC output.
Port LED definitions for NetWayXT repeater:
Status
Green LED
Yellow LED
OFF
Indicates it is connected as 10Base-T or no link.
Indicates no link.
ON
Indicates it is connected as 100Base-TX.
Indicates a link.
Blinking
---------------------------
Indicates activity.
Port LED definitions for NetWayXTX repeater:
Status
PoE/PoE+ Output LED
PoE/PoE+ Input LED
Yellow LED
OFF
No PoE/PoE+ Output
No PoE/PoE+ Input
Indicates no link.
ON
Normal PoE/PoE+ Output
PoE/PoE+ Input
Indicates a link.
Blinking
-------
-------
Indicates activity.
Structured
Cable from
Network
Switch
12-16VDC
Input
+ ---
12VAC to 24VAC or
5VDC to 24VDC Input
for PoE shutdown
Structured Cable from
IP Camera, IP Lock or IP device,
NetWay1512 or NetWayXT
+ DC ---
Input
Power
Shutdown
IN
OUT
Port
Status
NetWay112
Single Port Injector (Midspan)
12VDC, 1.6A Input
48VDC 15.4W max. per IEEE 802.3af
www.altronix.com
I.T.E. 43KC
Structured
Cable from
Network
Switch
12-16VDC
Input
+ ---
12VAC to 24VAC or
5VDC to 24VDC Input
for PoE shutdown
Structured Cable from
IP Camera, IP Lock or IP device,
NetWay1512 or NetWayXT
+ DC ---
Input
Power
Shutdown
IN
OUT
Port
Status
NetWay112
Single Port Injector (Midspan)
12VDC, 1.6A Input
48VDC 15.4W max. per IEEE 802.3af
www.altronix.com
I.T.E. 43KC
Fig. 1a
Fig. 1b
Fig. 1c
