Altronix HubWayDS Series, Руководство по установке

Страница: 8 / 8

- 8 - HubWay8DS Installation Guide
Fig. 6
Mounting Options:
Rack Mount Installation
1. Remove factory installed screws from both sides of the rack chassis (Fig. 6a) .
2. Install mounting brackets (A) on the left and right side of rack chassis using the
two (2) flat head screws (B) (included) (Fig. 6b) .
3. Place unit into desired EIA 19” rack position and secure with mounting screws (not included) (Fig. 6c).
B
A
Fig. 6a Fig. 6b Fig. 6c
Top Top Top
Front
Left
Front
Left
Front Left
Remove
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Wall Mount Installation
1. Install mounting brackets (A) on the left and right side of rack chassis using
two (2) flat head screws (B) (included) (Fig. 7a) .
2. Place unit at desired location and secure with mounting screws (not included) (Fig. 7b).
Caution:
It is necessary to make sure mounting screws are securely fastened to a beam when installing.
Fig. 7 Fig. 7a Fig. 7b
B
A
Fig. 8
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Shelf Installation
1. Position and affix rubber pads (C) (included) at
each corner on the bottom of the unit (Fig. 8) .
2. Place unit in desired location.
A
B
C
Mounting Hardware (Included):
C
Left Side
Rubber Pad
Two (2) mounting brackets
Six (6) flat head screws
for mounting brackets.
Four (4) rubber pads.
Altronix is not responsible for any typographical errors.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty
IIHubWay8DS K22U MEMBER