Altronix eBridge8PCRX, Руководство по установке

Страница: 4 / 8

- 4 - eBridge8PCRX
Single IP camera:
Fig. 2
Maximum Length of Coax Type vs. Camera Power/PoE Class:
Camera
Power/
PoE Class
Coax Type
RG59/U - 23AWG RG59/U - 22AWG RG59/U - 20AWG RG59/U - 18AWG RG6/U - 18AWG
Max. Length (meters)
13W/0 260.6 335.3 500 500 500
4W/1 500 500 500 500 500
6.5W/2 500 500 500 500 500
13W/3 260.6 335.3 500 500 500
19W 152.4 198.1 315.5 500 500
25W 118.9 150.6 239.3 365.8 365.8
eBridge8PCRX User Interface and Programming:
Note: A constant PC connection is not required for proper operations and is used as a local programming/monitoring tool only.
Step 1. Set Local Area Connection of your laptop to DHCP mode.
For Windows XP:
a. Open Network Connections by clicking Start button, then clicking Settings, then clicking Network Connections.
b. Right click the Local Area Connection. Click Properties. Administrator permission required
If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
c. Double click Internet Protocol (TCP/IP) menu item.
d. Choose the Obtain an IP address automatically option.
e. Click OK. Close all windows.
For Windows Vista:
a. Open Network Connections by clicking the Start button Picture of the Start button, clicking Control Panel,
clicking Network and Internet, clicking Network and Sharing Center, and then clicking Manage Network
connections.
b. Right click the Local Area Connection icon, and then click Properties. Administrator permission required
If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
c. Click the Networking tab. Under this connection uses the following items, click either Internet Protocol
Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties.
d. To specify IPv4 IP address settings, click Obtain an IP address automatically, and then click OK.
e. To specify IPv6 IP address settings, click Obtain an IPv6 address automatically, and then click OK.
For Windows 7:
a. Open Network Connections by clicking the Start button Picture of the Start button, clicking Control Panel,
clicking Network and Internet, clicking Network and Sharing Center, and then clicking Change Adapter
Settings.
Data In Data In
1 2 3 4 5 6 7 8
Input 1
10/100
Base-T
1 2 3 4
10/100
Base-T
5 6 7 8
Ethernet
Back of Unit
Front of Unit
Up to
500m
IP Camera
Up to
100m
Ethernet Switch
Up to
100m
Up to
100m
Up to
100m
NVR Network
Video Server
(Head End
Equipment)
--
+ --
+
eBridge1PCTX
Up to
500m
IP Camera
eBridge1PCTX
Up to
500m
IP Camera
eBridge1PCTX
Up to
500m
IP Camera
eBridge1PCTX