- 2 -
eBridge8PCRM/16PCRM
Overview:
eBridge8PCRM/16PCRM and eBridge1PCTX or eBridge1ST are CAT5 to Coax cable Ethernet adapters/Media converters
that deliver data and power over the coax cable in a PoE+ compliant format. The paired set enables fast 10/100Base-T Ethernet
digital communication to be transmitted over Coax cable. eBridge8PCRM/16PCRM receiver is powered by a UL Listed
limited power source, PoE midspan or endspan product, such as a NetWay8M and NetWay16M, and sends its power over
the coax to the eBridge1PCTX or eBridge1ST transmitter under PoE protocol. This enables the eBridge8PCRM/16PCRM to
be used in a managed manner, allowing for remote camera reset. The eBridge1PCTX or eBridge1ST, in turn, delivers that
PoE+ compliant power to a PoE enabled camera or IP device. The eBridge8PCRM/16PCRM will not deliver power to non-
compliant devices, thus avoiding damage to improperly connected analog cameras. These plug and play units facilitate system
upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with
installing new network cabling. In addition, data transmission and power over the Coax is possible up to 457m in comparison
to 100m Ethernet maximum distance (see Maximum Length of Coax Type vs. Camera Power/PoE Class, pg. 3). A maximum
range from head end to the PoE camera/device is 657m taking into consideration that up to 100m of structured cable may be
deployed at each end.
Features:
Agency Listings:
• UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
• CE approved.
• C-Tick compliant.
Compatible Transceivers:
• eBridge1PCTX: PoE/PoE+ compliant transceiver.
• eBridge1ST: PoE/PoE+ compliant mini transceiver.
Input:
• Powered by a UL Listed limited power source,
PoE midspan or endspan.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5 or better structured cable.
• Distance: up to 100m.
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
PoE compliant to IEEE 802.3af (15W) and PoE+
compliant to IEEE 802.3at (30W) delivered to camera by
eBridge1PCTX or eBridge1ST. Power provided by
eBridge8PCRM/16PCRM to eBridge1PCTX or
eBridge1ST by PoE protocol.
• Throughput is rated to pass 25mbps of data at distances
up to 500m. With proper headend equipment this
supports Megapixel, HD720, HD1080.
Coax:
• Distance: up to 500m (see Maximum Length of Coax
Type vs. Camera Power/PoE Class, pg. 4) for power
delivery of coax.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• eBridge8PCRM/16PCRM:
Blue LED - Coax link connection.
Green - PoE ON.
Green - Power ON.
• eBridge8PCRM/16PCRM, eBridge1PCTX, eBridge1ST:
Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
LED Indicators
(cont’d)
:
• eBridge1PCTX and eBridge1ST:
Blue LED - Coax link connection.
Green LED - PoE from eBridge8PCRM/16PCRM.
Environmental:
•
Operating Temperature:
eBridge8PCRM/16PCRM:
-20ºC to 49ºC (-4ºF to 120.2ºF).
eBridge1PCTX:
For 15W: -40ºC to 75ºC (-40ºF to 167ºF).
For 30W: -40ºC to 49ºC (-40ºF to 120.2ºF).
eBridge1ST:
For 15W: -40ºC to 75ºC (-40ºF to 167ºF).
For 30W: -40ºC to 65ºC (-40ºF to 149ºF).
•
Storage Temperature: -30º to 70ºC (-22º to 158ºF).
• Humidity: 20 to 85%, non-condensing.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog
CCTV installation.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras (see note, pg. 2).
• Extend Network link distance in an industrial
environment over 610m (see note, pg. 2).
• Upgrade deployed CCTV Coax to a digital network
in Retail, Hospitality, Arenas, Casinos, Airports,
Schools, Hospitals, Transportation, etc.
Mechanical:
• Dimensions (H x W x D approx.):
eBridge8PCRM/16PCRM dimensions:
1.625” x 19.125” x 8.5” (42mm x 486mm x 216mm)
eBridge1PCTX dimensions:
1” x 2.5” x 4.375” (25.4mm x 63.5mm x 111.125mm).
eBridge1ST dimensions:
2.27” x 2.645” x 1.12” (57.66mm x 67.18mm x 28.44mm).
