- 2 -
ALTV2416 series
Overview:
ALTV2416 Series CCTV Power Supplies provide 24VAC/28VAC distributed via sixteen (16) fuse or PTC protected outputs
for powering CCTV Cameras, heaters, and other video accessories.
Sixteen (16) Output ALTV2416 Reference Chart:
Altronix
Model Number
Output
Voltage
Total
Output
Current
(Power)
Number
of
Outputs
PTC Protected
Outputs
(auto-resettable)
Fuse
Protected
Outputs
Output
Current
(max. per
output)
Main
Fuse
Ratings
115VAC
50/60Hz
Input
Current
ALTV2416
24VAC
8A
16
-----
P
3.5A
Two (2)
5A/250V
1.9A
28VAC
7A
ALTV2416CB
24VAC
8A
16
P
-----
2.5A
28VAC
7A
ALTV2416350
24VAC
14A
16
-----
P
3.5A
Two (2)
15A/250V
2.7A
28VAC
12.5A
ALTV2416350CB
24VAC
14A
16
P
-----
2.5A
28VAC
12.5A
ALTV2416300M
24VAC
12.5A
16
-----
P
3.5A
-----
28VAC
10A
ALTV2416300CBM
24VAC
12.5A
16
P
-----
2.5A
28VAC
10A
ALTV2416600
24VAC
28A
16
-----
P
3.5A
Two (2)
15A/250V
5.4A
28VAC
25A
ALTV2416600CB
24VAC
28A
16
P
-----
2.5A
28VAC
25A
Specifications:
Installation Instructions:
1. Mount unit in the desired location. Mark and predrill holes in the wall to line up with the top two keyholes in the
enclosure. Install two upper fasteners and screws in the wall with the screw heads protruding. Place the enclosure’s
upper keyholes over the two upper screws, level and secure. Mark the position of the lower two holes. Remove the
enclosure. Drill the lower holes and install the three fasteners. Place the enclosure’s upper keyholes over the two
upper screws. Install the two lower screws and make sure to tighten all screws (Enclosure Dimensions, pg. 7, 8).
Secure enclosure to earth ground.
2. Slide switch on PD board to OFF position for models ALTV2416 and ALTV2416CB (Fig. 1, pg. 4).
Turn OFF main switch on all other models (Figs. 2-4, pgs. 4-6).
3. All units are factory set for 24VAC operation.
For 28VAC operation, adjust unit prior to mounting and applying power as follows:
Change the wire position so that the black wire [28V] is connected to the terminal marked [P] and
the yellow wire [24V] is connected to the terminal marked [S].
Input:
• 115VAC, 50/60Hz.
Output:
• Sixteen (16) fuse or PTC protected outputs.
• 24VAC or 28VAC output voltage.
• Outputs are rated @ 3.5A (fused) or 2.5A (PTC).
• Surge suppression.
Features:
• Surge suppression.
• AC power LED indicator.
• Power ON/OFF switch (ALTV2416 and ALTV2416CB).
• Illuminated power disconnect circuit breaker with
manual reset for all other models.
Features
(cont’d)
:
• Unit maintains camera synchronization.
• Ease of installation saves time & eliminates costly labor.
• Spare fuses included (on fuse protected models).
Enclosure Dimensions:
ALTV2416 and ALTV2416CB:
8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm).
ALTV2416300M and ALTV2416300CBM:
8.5” x 7.5” x 3.75” (215.9mm x 191mm x 95mm).
ALTV2416350, ALTV2416350CB,
ALTV2416600, and ALTV2416600CB:
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm).
