Altronix AL1024NK8QP Series, Руководство по установке

Страница: 8 / 12

- 8 - AL1024NK8QP Series Installation Guide
Fig. 4 - AL1024NK8(D)QP
DC Output to devices
( AL1024NK8QP - non power-limited, AL1024NK8DQP - power-limited)
Tamper Switch
AC FAIL NC C NC C BAT FAIL
+ INP1 - + INP2- +BAT IN- +BAT OUT-
BAT AC NC C NC
C
LINQ8PD(CB)
PTC
Protected
Outputs on
AL1024NK8DQP
-- OUT1 + -- OUT2 + -- OUT3 + -- OUT4 + -- OUT5 + -- OUT6 + -- OUT7 + -- OUT8 +
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Altronix
AL1024ULXB2
L
G
N
BAT FAIL
AC FAIL
NC C NO NC C NO
AC DC
- BAT
+
+ DC -
AC DELAY
Power Output
Factory wired to
LINQ8PD(CB) and VR6
(non power-limited)
Battery Output
Factory wired to
LINQ8PD(CB)
(non power-limited)
24VDC from
AL1024ULXB2
12VDC from VR6
(mounted under LINQ8PD(CB)
Battery input (factory wired)
Connect batteries
Factory wired supervisory connections (power-limited)
Factory wired supervisory
connections (power-limited)
FACP Interface
(power-limited)
Supervision
(power-limited)
Optional Rechargeable
Stand-by Battery
Optional Rechargeable
Stand-by Battery
CAUTION: Use two (2) 12VDC stand-by batteries.
Keep power-limited wiring separate from non power-limited.
Use minimum 0.25” spacing.
12AH Rechargeable batteries are the largest batteries that
can fit in this enclosure.
A UL listed external battery enclosure must be used if using
40AH or 65AH batteries.
Tamper Switch
(included)
To Access Control Panel or
UL Listed Reporting Device
Edge of
Enclosure
Enclosure
Fig. 4a