5
SYSTEM SETUP
Mounting Sensors
1)
Connect Pole Mount securely near top of trailer. Additional mount supplied
for holding in trailer during transportation.
2)
Connect sensor housing and wind sensor to Pole as shown.
3)
Mount pole-mount style wind sensor on top of post on tighten retaining ring.
4)
Insert Sensor Pole in mount and turn so mark on wind sensor is pointing
toward finish line of track then tighten.
5)
Plug in 4-pin wind sensor cable to sensor housing and plug in 8-pin sensor
housing cable from console.
6)
SENSOR POLE SHOULD NOT BE LEFT UP WHILE TRAVELING!
There are only four connectors on the console unit.
1)
Connect interface cable to COM PORT (default com port 1) on
PC if purchased.
2)
Connect 8-pin cable from sensor housing. See Cable Lock
below.
3)
Connect antenna cable to console. (Paging option only)
Connect cable to console.
