10
General Safety
GB
•
Before refuelling, switch off the engine and allow it to cool.
•
When
refuelling,
DO NOT
smoke or allow naked
À
ames in the area.
•
Spilt fuel must be made safe immediately, by using sand. If fuel is spilt on your clothes, change them.
•
Store petrol in an approved, purpose made container away from heat and ignition sources.
•
This equipment is heavy and must not be lifted single-handedly, either
GET HELP
or use suitable lifting equipment.
•
Cordon off the work area and keep members of the public and unauthorized personnel at a safe distance.
•
Personal Protective Equipment (PPE) must be worn by the operator when ever this equipment is being used (see Health & Safety).
•
Make sure you know how to safely switch this machine
OFF
before you switch it
ON
in case you get into dif
¿
culty.
•
Always switch
OFF
the engine before transporting, moving it around the site or servicing it.
•
During use the engine becomes very hot, allow the engine to cool before touching it. Never leave the engine running and
unattended.
•
Never remove or tamper with any guards
¿
tted, they are there for your protection. Always check guards for condition and
security,
if any are damaged or missing,
DO NOT USE THE PRO 600
until the guard has been replaced or repaired.
•
Do not operate the machine when you are ill, feeling tired, or when under the in
À
uence of alcohol or drugs.
Fuel Safety
Improper maintenance can be hazardous. Read and Understand this section before you perform any
maintenance, service or repairs.
WARNING
For your own personal protection and for the safety of those around you, please read and ensure you fully understand the following
safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment
safely. If you are unsure about the safe and correct use of the Pro 600, consult your
reseller
.
Health And Safety
GB
Safe Disposal.
Instructions for the protection of the environment.
The machine contains valuable materials. Take the discarded
apparatus and accessories to the relevant recycling facilities.
Environment
GB
Component Material
Handle
Steel
Belt Guard
ABS
Bedplate
Steel
Hand Grips
Rubber
Engine
Aluminium
and
Steel
Motor
Steel
and
Copper
Gearbox
Aluminium, Steel and
Phosphor
Bronze
Various Parts
Steel and Aluminium
Petrol is
À
ammable. It may cause injury and property damage. Shut down the engine, extinguish all
open
À
ames and do not smoke while
¿
lling the fuel tank. Always wipe up any spilled fuel.
WARNING
Vibration.
Some vibration from the trowelling operation is transmitted through the handle to the operator’s hands.
DO NOT
exceed the maximum
usage times.
PPE
(Personal Protective Equipment).
Suitable PPE must be worn when using this equipment i.e. Safety Goggles, Gloves, Ear Defenders, Dust Mask and Steel Toe capped
footwear. Wear clothing suitable for the work you are doing. Tie back long hair and remove any jewellery which may catch in the
equipment’s moving parts.
Electric Machines.
Electricity can kill! Always ensure that the machine is disconnected from the power supply before carrying out any maintenance/re-
pairs. Never use the machine in wet conditions.
Petrol Machines.
Fuel.
Do not ingest fuel or inhale fuel vapours and avoid contact with your skin. Wash fuel splashes immediately.
If you get fuel in your eyes, irrigate with copious amounts of water and seek medical attention as soon as possible.
Exhaust Fumes
WARNING
The exhaust fumes produced by this equipment are highly toxic and can kill!
Do not operate the Pro 600 indoors or in a con
¿
ned space, make sure the work area is adequately ventilated.
