35
Door Installation
1
2
3
Diagram 50
External
Dia. 49
10
4
Dia. 51
6
7
Diagram 49
Section
You can now fit the top door track to your building.
The right hand end of the door track should be
roughly inline with the outer edge of the glazing
bar below it (circled below). With help slide the
door onto the track from the open end making sure
the door wheels locate with the door track as
shown in diagram 49. At the same time you need
to locate the door guide with the door runner,
point 7.
Holding the door up from the runner below so that
it is just located in the runner (diagram 49, point 7)
fix the track with the first 25mm screw at point 1 in
diagram 50. The top edge of the door track should
be close to the top edge of the door header (NOT
above as this may cause water to pool).
