1. TERMINATOR
II
QUICK
START
-
SET
UP
MODE
1.1 After connecting TERMINATOR II to the mixer channels or subgroups follow
these points:
1.2 Press and hold the BYPASS button (for more than 4 seconds) related to
the channel you want to set up (CHANNEL 1 or CHANNEL 2): all 24 filter
leds will start flashing
1.3 Start generating intentional feedbacks increasing slowly the GAIN/VOLUME
on the mixer: TERMINATOR II will activate gradually the filters and the
correspondent leds will light
1.4 Usually 10 to 16 filters are enough to guarantee a safe set up without
modifying the audio timbre
1.5 Remember you can use up to 2 independent channels connected to
TERMINATOR II
1.6 To exit SET UP MODE and to STORE the fixed filter press quickly the related
channel BYPASS button: all filter leds turn on for a few seconds, then only
the stored ones keep on lighting
1.7 Now TERMINATOR II is set on LIVE MODE
And in such cases, all the expenses will be charged to the buyer.
3.5 In no event shall
be liable for any incidental or consequential damages.
LTO
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above exclusion or limitation may not apply to
you.
3.6 This warranty gives you the specific rights, and these rights are compatible
with the state laws, you may also have other statutory rights that may vary
from state to state.
7. WARRANTY
11
QUICK START
2.1 During the performance the accidental LIVE feedbacks are automatically
detected and killed: a new led will light to indicate the activation of a new
LIVE filter
2.2 If occasionally all 24 filters are activated (all filter leds on) and new LIVE
feedback occurs, TERMINATOR II is able to kill the new feedback substituting
the oldest less-used filter: the correspondent led will start flashing
2.3 You can operate in real time on the LIVE MODE VARIATIONS to adjust the
filter Q according to your audio source: generally for Music we suggest to
turn the knob towards 1/80th, for Speech towards 1/5th)
2.4 If you need to RESET the LIVE filters (keeping the FIXED ones previously
stored during the SET UP MODE) press and hold the BYPASS button for
about 2 seconds till only the FIXED filter leds keep on lighting
2.5 If you need to RESET completely TERMINATOR II and start a new SET UP,
press and hold the BYPASS button for more than 4 seconds till all 24 filter
leds will start flashing
2. TERMINATOR
II
QUICK
START
-
LIVE
MODE
Abnormal service or repairing by anyone other than the qualified personnel or
technician.
and contact telephone number.
2.3 A brief description of the defect will be appreciated.
2.4 Please prepay all the costs involved in the return shipping, handling and
insurance.
3. TERMS AND CONDITIONS
3.1
warrants that this product will be free from any defects in materials
LTO
and/or workmanship for a period of 1 year from the purchase date if you
have completed the Warranty Registration Card in time.
3.2 The warranty service is only available to the original consumer, who purchased
this product directly from the retail dealer, and it can not be transferred.
3.3 During the warranty service,
may repair or replace this product at its
LTO
own option at no charge to you for parts or for labor in accordance with the
right side of this limited warranty.
3.4 This warranty does not apply to the damages to this product that occurred
as the following conditions:
Instead of operating in accordance with the user's manual thoroughly, any abuse
or misuse of this product.
Normal tear and wear.
The product has been altered or modified in any way.
Damage which may have been caused either directly or indirectly by another
product / force / etc.
the returned machine, and give detail information about your return address
2.2 Please provide a copy of your sales receipt or other proof of purchase with
unit from any other extra damage.
product is well packed in its original shipping carton, and it can protect your
2.1 In case of return for any warranty service, please make sure that the
2. RETURN NOTICE
your warranty service.
1. WARRANTY REGISTRATION CARD
To obtain Warranty Service, the buyer should first fill out and return the enclosed
Warranty Registration Card within 10 days of the Purchase Date.
All the information presented in this Warranty Registration Card gives the
manufacturer a better understanding of the sales status, so as to provide a
more effective and efficient after-sales warranty service. Please fill out all the
information carefully and genuinely, miswriting or absence of this card will void