(22). 2 TRACK IN/OUT
These RCA connectors can be used to connect the output/input of a DAT, cassette or tape recorder.
(23). AUX SEND
These two1/4" phone jacks output the line signal from the AUX bus.
(24). AUX RTN
These four1/4" phone jacks return the signal from external effect units to the main mix bus, you can also use
these connectors as line level extra inputs. AUX RETURN2 is connected to internal DSP output, but this path
will be broken inserting external signal connectors to AUX RETURN2 socket.
(25). FOOT SW.
This 1/4" phone jack can be used to connect an external foot-switch to turn on/off the built-in effect module.
(26). HEADPHONE
This 1/4" stereo phone jack is used to connect the stereo headphones.
(27). CTRL ROOM OUTPUT
Left and right control room output connectors, to connect a control room monitoring system.
This LED lights up when the input signal is too strong. This LED is lit also when the built-in digital effect section
is muted.
(21). CLIP LED
(11). PHONES/CTRL ROOM Control
It adjusts control room speakers and headphones volume.
(12). 2TK IN Control
This pot adjusts the level of 2TK IN signal.
(13). 2TK TO CTRL ROOM Switch
Engaging this button the 2TK IN signal will be routed to control room output.
(14). 2TK TO MIX Switch
Engaging this button the 2TK IN signal will be routed to the main mix output.
(15). OUTPUT LEVEL LED Display
The stereo 12-segments LED meter indicates the signal level sent to CTRL ROOM and PHONES outputs.
(16). PWR LED Display
It indicates the OEX600 is powered on.
(17). MAIN MIX LEVEL Dial
Rotating this dial you will to adjust the overall volume of the left and right main mix outputs. The adjustable range
is from -
to +15dB.
(18). PRESETS Control
Through this knob you can select the effect that you desire to use.
There are16 effects options to choose from: several kinds of reverb, effects with modulation, and some versatile
two-effect combination. Please refer to chapter 5.
(19). AUX RTN2 (DFX) Control
This pot adjusts the signal coming from an external/internal effect device in -
to +15dB range.
(20). DSP MUTE Switch
This switch is used to activate/deactivate the built-in effect section.
10