17 FX RTN. Jack
Use the stereo phone jack to return the sound of an effect unit to the main
mix. You can also use it as a extra auxiliary stereo input.
SPO
TLIG
HT
4. CONTROL ELEMENTS
19 FX SEND
This jack is used to send out the signals from AUX bus.
20 CD/TAPE IN
Use the Tape input to connect a CD Player, Tape, DAT, iPOD or any other line-
level source.
21 CD/ TAPE LEVEL CONTROL
This knob controls the signal sent from CD/TAPE IN,which can be varied from
-
to+10 dB.
22 CD/TAPE OUT
These RCA jacks will route the main mix signal into a tape or DAT recorder.
23 PHONES
This socket will be used to send the signal to a pair of headphones.
24 SPK. OUT
The SPEAKER L&R phone jacks output the main signal from the internal power
amplifier and are used to connect speakers. They are internally connected in
parallel and output the same signal.
Note:
The total impedance of the connected speaker system must be between
4 and 8 ohms. Do not connect anything other than speakers to these jacks.
Connecting two speakers
4~8
-12
EQ OFF
EQ ON
0
-8
-4
+8
+12
+4
63
500
250
125
2K
1K
-12
0
-8
-4
+12
+8
+4
16K
8K
4K
STEREO GRAPHIC EQ
SPO
TLIG
HT
4. CONTROL ELEMENTS
Each one of these faders will boost or attenuate (+/-12 dB) the selected frequency
at a preset bandwidth. When all the faders are in the cent r position, the output
e
of the equalizer is flat response.
25 EQ Switch
Engage this button to add the stereo graphic EQ to the main mix output
circuit.It can be used to modify the frequency "contour" of a sound. If you
release the button, the stereo graphic EQ will be bypassed.
26 STEREO GRAPHIC EQ
25
9 Band EQ section (Optional)
26
The file system of USB memory for USB-MP3 player is FAT16 and FAT32. The
player can only decode MP3. It can have 7 rank subordinate folders at most,
and the maximum quantity of folders within MP3 files is 24. In the whole USB
memory, the total folders can not beyond 256(incluing those folders without
MP3 songs).
MP3 section (Optional)
MP3 PLAYER
00
03:08
MP3
USB REP
ALL
27
28
29 30
32
31
33
9
10
This control is used to control the volume of the processed signal sent to
Main Mix bus, which can be varied from -
to+10 dB.
18 FX RET CONTROL
