Alto MC250.8, Руководство пользователя

Страница: 10 / 15

OUTPUTS
CH5 CH6 CH7 CH8
CH1 CH2 CH3 CH4
Apparaten skall anslutas
till jordat uttag nar den
ansluts till ett natverk
BREAKER
AC INPUT
MODE SWITCHES
CH1 CH2
MODE SWITCHES
CH3 CH4
MODE SWITCHES
CH5 CH6
MODE SWITCHES
CH7 CH8
INPUTS
CH7
CH6
CH5
CH8
CH4
CH3
CH2
CH1
BRIDGE
MONO
BRIDGE
MONO
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
OUTPUTS
CH5 CH6 CH7 CH8
CH1 CH2 CH3 CH4
Apparaten skall anslutas
till jordat uttag nar den
ansluts till ett natverk
BREAKER
AC INPUT
MODE SWITCHES
CH1 CH2
MODE SWITCHES
CH3 CH4
MODE SWITCHES
CH5 CH6
MODE SWITCHES
CH7 CH8
INPUTS
CH7
CH6
CH5
CH8
CH4
CH3
CH2
CH1
BRIDGE
MONO
BRIDGE
MONO
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
5.2 Operate MC250.8 Power Amplifier In Parallel Mode
In this mode, the channel 1 input signal will be output from the output connectors of both channel 1 and channel
2. The channel 2 input jack is not used. The channel 1 and channel 2 volumes can be adjusted independently.
Furthermore, channel1 can only be parallelled with channel2, channel 3 only with channel 4, channel 5 only with
channel 6, and channel 7 only with channel 8.
5.3 Operate MC250.8 In Bridge Mode
In this mode, signal inputted from channel1can be output from the bridge output connectors. In this case, use the channel 1
volume control to adjust the volume. Turn the volume control of channel2 counterclockwise completely. Then, you can
control the volume of the whole system by adjusting the channel 1 volume control. Furthermore, channel1 can be bridged
with channel2 only, channel3 with channel4 only, channel5 with channel 6 only, and channel 7 with channel 8 only.
PARALLEL MODE
1 2 3 4 5 6 7 8 910
Channel 1
BRIDGE MODE
1 2 3 4 5 6 7 8 910
+
Channel 1
9
+
Channel 2
+
Channel 1
+