1. INTRODUCTION
2. FEATURE LIST
Sophisticated protecting circuit protects the machine from improper tampering
Excellent frequency echo and sound quality
High fidelity and low noise
Balanced XLR and 1/4" TRS input connectors
Output connectors are speak-on jacks and binding post terminals
Stereo mode, parallel mode and bridged mode are available
High-speed and low noise fan for releasing heat. The inside temperature determines the fan speed.
than
Indicator for the output balance, as well as status indicators of SIG and CLIP. When there is any signal is more
100mV, the SIG LED lights up. When there is overload, the CLIP LED lights up. If anything abnormal happens to
the circuits, the CLIP LED will be continuously on, with no action from the circuits. This helps the user todetermine
which status it is in.
Solid and durable, can be mounted into a cabinet
Manufactured under QS9000, VDA6.1 certified management system
3. CONTROL ELEMENTS
3.1
Front Panel
Thank you very much for expressing your confidence in
products by purchasing our MAC 2.2/2.3/2.4 Stereo
LTO
Power Amplifier. With the MAC 2.2/2.3/2.4 you have acquired an extremely musical and flexible high power
amplifier which is based on many years of experience and finding in amplifier technology and is used through the
world in the renowned studios. The MAC 2.2/2.3/2.4 is used for professional output of stage stereo with excellent
performance. Output power can be adjusted at the user's demand, and the sound quality and protecting circuit are
both sophisticated.
The front panel presents you with 6 LEDs (power LED, protection LED, clip & signal LED for each channel) and 2
level controls, you can operate this unit more precise and easier. The output connectors are speak-on jacks and
binding post terminals, which are used for better matching. Before connecting this unit into your sound system,
please make sure it is powered down to prevent any electric shock.
1 . Mains Switch
This switch turns on and off the unit by controlling both phases.
2 . Power LED
This Power LED lights up when the unit is powered up.
3. Protection LED
This red LED lights up when the thermal-protection system is working, no signal is output during this
protection period. When any overheating occurs inside the unit (the critical temperature is 80 C), you should
0
speed up the air circulation or decrease the signal level for avoiding overheating. If the problem is corrected
the protection systems deactivate automatically, this LED goes out, and the normal amplifier operation is
resumed.
4
4. Clip Signal LED
The clip LEDs light up when distortion reaches or exceeds 0.5% approximately, which means the unit is being driven
by excessively high signal source, and you'd better adjust the level control until these LEDs go out.
POWER
ON
OFF
CLIP
SIG
POWER
CH1
CH2
PROT
1
1
2
2
3
5
4
3
4
