10
b. EQ menu
When you go to the EQ menu, the PC will display above picture. You can adjust each band's gain value, if this
unit is in LINK function, the change on channel A will be applied to channel B also. The adjustable range goes
from 12dB to +12dB.
7.3 Upload or Download
You can use UPLOAD from FILE menu to upload all saved user presets (30-79) from DIGAN2.30 unit to your computer.
DOWNLOAD from FILE menu will download all saved user presets in your computer to DIGAN2.30 unit.
7.4 Update system
If the version of Digan Editor program is different from that in DIGAN2.30 unit, the window will show error to ask
you to update your system in DIGAN2.30 unit, or your DIGAN2.30 can't be recognized by your computer. To
update your system in DIGAN2.30, do the following:
a. Turn on DIGAN2.30 while it is not connected with PC, then press 20k of channel B and BYPASS key at the
same time to enter Update mode.
b. Now connect DIGAN2.30 to PC and run DIGAN Editor software, the window will ask whether you are sure to
update your system, press OK to start.
c. If you have selected a wrong model (for example DIGAN2.14), you have to reselect the right model. If the updating
process is terminated abnormally, please restart your updating from the beginning.
- DELAY:
You can use Up/Down arrow or drag the speaker to adjust both channel's delay time, or together by
LINK function, the LED display on the front panel of DIGAN2.30 will show the channel's delay time.
- LP/HP Freq/Slope:
Adjust the frequency and slope of LP/HP filter or together by LINK function.
- VOLUME:
Adjust both channel's volume or together by LINK function, also the LED display on the front panel
of DIGAN2.30 will show the channel's volume.
d. While this update is finished, firstly, disconnect the main power, and then connect to the main power again to
restart your DIGAN2.30 unit.
