GT Switch
It is used to adjust the input signal level of electrical guitar. When an electrical
guitar is being used, it is ineffective to adjust MT switch.
6
MT Switch
It is used to adjust the input signal level of microphone. When an microphone
is being used, it is ineffective to adjust GT switch.
7
Band Selector
With the adjusting bar, the band selector can be used to switch to an expected
frequency before switching the frequencies, turn off the transmitter first and
then turn on it.
8
Adjusting Bar
It is used to adjust BAND SELECTOR, MT SWITCH and GT SWITCH.
9
POWER LED
When the unit is turned on, this LED flashes once. When the unit is turned off,
this LED lights off slowly. When the batteries are short of power, this LED
flashes. When the batteries can not be used, this LED lights up.
10
SPO
TLIGHT
3. CONTROL ELEMENTS
7
