background image

1 2 • 2 0 M W / 2 0 • 2 0 M W O p e r a t i o n & C a r e M a n u a l • 1

D E L I V E R Y

This Alto-Shaam appliance has been

thoroughly tested and inspected to ensure only the
highest quality unit is provided. Upon receipt,
check for any possible shipping damage and report
it at once to the delivering carrier.

See

Transportation Damage and Claims section
located in this manual.

This appliance, complete with unattached

items and accessories, may have been delivered in
one or more packages. Check to ensure that all
standard items and options have been received
with each model as ordered.

Save all the information and instructions

packed with the appliance. Complete and return
the warranty card to the factory as soon as
possible to ensure prompt service in the event of a
warranty parts and labor claim.

This manual must be read and understood by

all people using or installing the equipment
model. Contact the Alto-Shaam service
department if you have any questions concerning
installation, operation, or maintenance.

NOTE:

All claims for warranty must include the
full model number and serial number of
the unit.

U N P A C K I N G

1. Carefully remove the

appliance from the
carton or crate.

NOTE:

Do not discard the
carton and other
packaging material
until you have
inspected the unit
for hidden damage
and tested it for
proper operation.

2. Read all instructions in this manual carefully

before initiating the installation of this appliance.

DO NOT DISCARD THIS MANUAL.
This manual is considered to be part of the
appliance and is to be provided to the owner or
manager of the business or to the person
responsible for training operators.

Additional

manuals are available from the Alto-Shaam
service department.

3. Remove all protective plastic film, packaging

materials, and accessories from the appliance
before connecting electrical power. Store any
accessories in a convenient place for future use.

®

®

Содержание CombiMate 12-20MW


























Отзывы: