#884b - CC-72/BKR and CC-96/BKR Display Units - Operation & Care Manual • 3
Setup
Locate the merchandiser indoors with a normal
room temperature of 68-70°F in an area where it will
not be affected by constant cool air current from air
conditioners, open doors and windows, etc.
The unit must not be installed in any area where it
will be affected by steam, grease, dripping water,
high temperatures, or any other severely adverse
conditions.
In order to maintain established National
Sanitation Foundation standards, all stationary floor
models must be sealed to the floor with a R.T.V. or
silastic meeting N.S.F. requirements or have 6"
(153mm) unobstructed clearance beneath the unit.
Warranty will become null and void if these directions
are not followed.
Before operating the unit, clean it with a clean,
damp cloth and mild soap solution. Glass cleaner can
be used on the glass.
Electrical Installation
Use a professional electrician or serviceman for
installation and service in accordance with national
codes. If necessary, a proper receptacle or outlet
configuration, as required for the unit, must be
installed by a licensed electrician in accordance with
applicable, local electrical codes. Remember to
position this unit so that the power supply cord is
easily accessible in case of an emergency.
An identification tag is permanently mounted
on cabinet.
SAMPLE
H E AT E D D I S P L AY C A S E S
®
PATENT NOS.
3521030
4595247
®
PH
AT NO TIME SHOULD THE INTERIOR OR
EXTERIOR BE STEAM CLEANED, HOSED
DOWN, OR FLOODED WITH WATER OR
LIQUID SOLUTION OF ANY KIND. DO NOT
USE WATER JET TO CLEAN.
S E V E R E D A M A G E O R E L E C T R I C A L H A Z A R D
C O U L D R E S U LT.
WARRANTY BECOMES VOID IF APPLIANCE IS FLOODED.
TO PREVENT PERSONAL INJURY,
USE CAUTION WHEN MOVING OR
LEVELING THIS APPLIANCE.
IMPROPER INSTALLATION, ALTERATION,
ADJUSTMENT, SERVICE OR MAINTENANCE
COULD RESULT IN SEVERE INJURY, DEATH
OR CAUSE PROPERTY DAMAGE.
