Alto-Shaam 500-1D MARINE, Руководство по эксплуатации и уходу

Страница: 12 / 23

O & C M A N UA L • D R AW E R WA R M E R
P G . 1 1
1. Disconnect unit from power
source, and let cool.
2. Remove, cover or wrap, and
refrigerate food.
3. Remove drawer pans and
clean separately. The drawer
assembly is completely
removable. Remove from the cabinet and clean
to prevent a build-up of food residue from
interfering with the function of the drawer
assembly. Regular cleaning will help prolong the
life of these parts.
4. Clean interior metal surfaces of the unit with a
damp, clean cloth and any good commercial
detergent or grease solvent at the recommended
strength. Use a plastic scouring pad or oven
cleaner for difficult areas. Rinse surfaces
thoroughly by wiping with sponge and clean,
warm water.
NOTE: Avoid the use of abrasive cleaning,
compounds, chloride based cleaners, or
cleaners containing quaternary salts. Never
use hydrochloric acid (muriatic acid) on
stainless steel.
5. Wipe control panel, vents, handles, and gaskets
thoroughly since these areas harbor food debris.
6. Interior can be wiped with a sanitizing solution
after cleaning and rinsing. This solution must
be approved for use on stainless steel food
contact surfaces.
7. To help maintain the protective film coating on
polished stainless steel, clean the exterior
of the unit with a cleaner recommended for
stainless steel surfaces. Spray the cleaning agent
on a cloth and wipe with the grain of the
stainless steel.
Always follow appropriate state or local health
(hygiene) regulations regarding all applicable
cleaning and sanitation requirements for
foodservice equipment.
C A R E a n d C L E A N I N G
The cleanliness and appearance of this unit will contribute considerably to
operating efficiency and savory, appetizing food. Good equipment kept
clean works better and lasts longer.
THOROUGHLY CLEAN THE UNIT DAILY
AT NO TIME SHOULD THE INTERIOR OR
EXTERIOR BE STEAM CLEANED, HOSED
DOWN, OR FLOODED WITH WATER OR
LIQUID SOLUTION OF ANY KIND. DO NOT
USE WATER JET TO CLEAN.
SEVERE DAMAGE OR ELECTRICAL HAZARD
COULD RESULT.
WARRANTY BECOMES VOID IF APPLIANCE IS FLOODED.