background image

T R A N S P O RTAT I O N  

D A M A G E   a n d   C L A I M S

All Alto-Shaam
equipment is
sold F.O.B. shipping
point, and when
accepted by the 
carrier, such shipments 
become the property
of the consignee.

Should damage occur in shipment, it is a matter between the
carrier and the consignee.  In such cases, the carrier is
assumed to be responsible for the safe delivery of the
merchandise, unless negligence can be established on the
part of the shipper.

1. Make an immediate inspection while the equipment is

still in the truck or immediately after it is moved to the
receiving area.  Do not wait until after the material is
moved to a storage area.

2. Do not sign a delivery receipt or a freight bill until you

have made a proper count and inspection of all
merchandise received.

3. Note all damage to packages directly on the carrier’s

delivery receipt.

4. Make certain the driver signs this receipt.  If he refuses

to sign, make a notation of this refusal on the receipt.

5. If the driver refuses to allow inspection, write the

following on the delivery receipt:  

D r i v e r   r e f u s e s   t o   a l l o w   i n s p e c t i o n   o f

c o n t a i n e r s   f o r   v i s i b l e   d a m a g e .

6. Telephone the carrier’s office immediately upon finding

damage, and request an inspection.  Mail a written
confirmation of the time, date, and the person called.

7. Save any packages and packing material for further

inspection by the carrier.

8. Promptly file a written claim with the carrier and attach

copies of all supporting paperwork.

We will continue our policy of assisting our customers in
collecting claims which have been properly filed and actively
pursued.  We cannot, however, file any damage claims for
you, assume the responsibility of any claims, or accept
deductions in payment for such claims.

Alto-Shaam, Inc. warrants to the original purchaser that any
original part that is found to be defective in material or
workmanship will, at our option, subject to provisions
hereinafter stated, be replaced with a new or rebuilt part.

The labor warranty remains in effect one (1) year from installation
or fifteen (15) months from the shipping date, whichever occurs
first.

The parts warranty remains in effect one (1) year from installation
or fifteen (15) months from the shipping date, whichever occurs
first.

Exceptions to the one year part warranty period are as listed:

A. Halo Heat cook/hold ovens include a five (5) year parts

warranty on the heating element.  Labor will be covered
under the terms of the standard warranty period of one (1)
year or fifteen (15) months.

B. Alto-Shaam Quickchillers include a five (5) year parts

warranty on the refrigeration compressor.  Labor will be
covered under the terms of the standard warranty period of
one (1) year or fifteen (15) months.

This warranty does not apply to:

1.

Calibration

2.

Replacement of light bulbs and/or the replacement of
display case glass due to damage of any kind.

3.

Equipment damage caused by accident, shipping, improper
installation or alteration.

4.

Equipment used under conditions of abuse, misuse,
carelessness or abnormal conditions.

5.

Any losses or damage resulting from malfunction, including
loss of product or consequential or incidental damages of
any kind.

6.

Equipment modified in any manner from original model,
substitution of parts other than factory authorized parts,
removal of any parts including legs, or addition of any
parts.

This warranty is exclusive and is in lieu of all other warranties,
expressed or implied, including the implied warranties of
merchantability and fitness for purpose.  In no event shall the
Company be liable for loss of use, loss of revenue, or loss of
product or profit, or for indirect or consequential damages.
This warranty is in lieu of all other warranties expressed or
implied and Alto-Shaam, Inc. neither assumes or authorizes any
persons to assume for it any other obligation or liability in
connection with Alto-Shaam equipment.

A LT O - S H A A M ,   I N C .

W a r r a n t y   e f f e c t i v e   J a n u a r y   1 ,   2 0 0 0

W 1 6 4   N 9 2 2 1   W a t e r   S t r e e t  

P . O .   B o x   4 5 0  

M e n o m o n e e   F a l l s ,   W i s c o n s i n   5 3 0 5 2 - 0 4 5 0  

U . S . A .

P H O N E :

2 6 2 . 2 5 1 . 3 8 0 0

FA X : 2 6 2 . 2 5 1 . 7 0 6 7  

8 0 0 . 3 2 9 . 8 7 4 4

U

.

S

.

A

/

C A N A D A

W E B S I T E

:

8 0 0 . 5 5 8 . 8 7 4 4

U S A

/

C A N A D A

2 6 2 . 2 5 1 . 1 9 0 7

I N T E R N AT I O N A L

W W W

. a l t o - s h a a m . c o m

P R I N T E D I N U

.

S

.

A

.

RECORD THE MODEL AND SERIAL NUMBERS OF THE UNIT FOR EASY REFERENCE.  ALWAYS REFER TO BOTH

MODEL AND SERIAL NUMBERS IN  ANY CONTACT WITH ALTO-SHAAM REGARDING THE UNIT.

Model: 

_____________________________________________________

Voltage: 

____________________________________________________

Serial Number: 

_____________________________________________

Date Installed:

_______________________________________________

Purchased From: _____________________________________ 

_____________________________________________________________

LIMITED

WARRANTY

Содержание 100-HSL/BCB-2

















Отзывы: