5
Setup
Volume Control
The TS3 Series loudspeaker accepts both line-level and mic-level audio
sources. Before connecting your audio source, turn the
Volume
knob to the
minimum position (fully counter-clockwise).
Line-Level Audio Source
When using an audio source such as a mixer, CD/MP3 player or audio
preamp, follow the
outer
/
Line
level band indicator.
If the
Signal Limit LED
is on, do
not
advance the
Volume
knob any further.
Doing so may damage your TS3 loudspeaker.
In most circumstances, you will not need to turn the volume beyond
0 dB
.
If your audio source has unusually low output, you may turn the
Volume
knob
past
0 dB
, but not past the
Signal Limit indicator
(as explained above).
Mic-Level Audio Source
Important
: If you are using an instrument with active preamp, treat the
instrument as a line-level audio source (as explained above).
When using a microphone or instrument audio source, follow the
inner
/
Mic
level band indicator.
Because the mic and instrument level is typically lower than a line level, you
can use the full rotation of the
Volume
knob.
As you turn up the
Volume
knob, please observe the
Signal Limit
indicator
. If the
Signal Limit LED
is on, do
not
advance the
Volume
knob
any further. Doing so may damage your TS3 loudspeaker.
