Page 10
SS-UV40
Installation & Users Manual
Operation
Settings
Spectra Series Products offer three (3) buttons to program the fixture. All settings for Modes, DMX address,
and Personalities can be made by using the three buttons on the back of the unit while power is on. To activate
the three digit display, press any of the three button. After 4 seconds of inactivity, the display will go blank.
All settings can be made by using the three buttons on the back of the unit while power is on. These include:
•
DMX Address
•
Fixture Personalities
•
Stand-Alone Effects
•
Local Channel Control
•
Lock the Fixture (from unwanted changes after programming)
•
Master Control Mode
DMX MODE
This mode is used for setting
•
DMX address
•
Personalities
•
Stand-Alone Effects
STAND ALONE MODE
This mode is used for setting the fixture to a desired intensity.
While in stand-alone mode, the hundreds button cycles through ‘r’, ‘G’, ‘b’, and ‘A’. colors . (r = UV1; G = N/A;
b = N/A; A = N/A). The tens and ones digits select 0-99 values. 99 is actually full. The 0-255 scale is spread
Modes
