Lighting
BRINGING IMAGINATION TO LIGHT
Lighting
BRINGING IMAGINATION TO LIGHT
M a n u a l
O P E R A T I O N
Spectra Series
57 Alexander St., Yonkers, NY 10701
Tel: 914-476-7987
Visit our website at www.altmanlighting.com
© 2012 Altman Stage Lighting, Inc.
11
MASTER MODE
( Di
ff
erent than the Master Channel described on page 7.)
Master Mode only works while in STAND-ALONE EFFECTS MODE
(see page 8). It causes the unit that is
set to Master Mode to behave like a console and Transmit 4-channel (RGBA) 8-bit DMX set on address 001,
re
fl
ecting its present light output.
Note:
Only the
fi
rst unit that is going to serve as the MASTER
fi
xture should be set to Stand-alone E
ff
ects
mode with Master Mode on. Stand-alone E
ff
ects Mode with Master Mode on should also not be used while
units are connected to a DMX console. All
fi
xtures following the Master
fi
xture should be set with the Master
Mode OFF, for Normal Operation.
To Turn on
MASTER MODE
:
To Turn o
ff
the
MASTER MODE
:
1. Place
fi
xture in Stand-alone Mode (see page 8)
2. Wait a few seconds until the display goes blank
3. Press and hold the [ HUNDREDS ] button
4. Press and hold the [ ONES ] button
5. Release the [ HUNDREDS ] button
6. Release the [ ONES ] button
7. Display will show
ON
for a moment to indicate new setting and then blink.
8. Address remaining
fi
xtures connected to the MASTER
fi
xture to DMX address 001
Wait a few seconds until the display goes blank
Press and hold the [ HUNDREDS ] button
Press and hold the [ ONES ] button
Release the [ HUNDREDS ] button
Release the [ ONES ] button
Display will show
OFF
for a moment to indicate new setting and then blink.
