Compact Scaler Switcher
Altimium 13 www.altimium.com
4.3 Operations of CEC Function
SCA51D supports CEC and CEC standby functions, and can be enabled/ disabled
through RS232 commands or OSD menu. If the HDMI source device supports CEC and
its CEC is on, and when SCA51D enter in standby/startup mode, then source device will
automatically enter in standby/startup mode.
And due to CEC function, user can control HDMI source device with basic operations
(play, pause, fast forward, fast reverse, menu etc.). So user is able to control SCA51D
and HDMI source device via the IR remote of SCA51D.
Commands for CEC function:
“50686%” (enable CEC) and “50687%” (disable CEC).
The working status related to CEC and STANDBY is showed as below:
Situation
Working Status
CEC: on, Standby: on
Press STANDBY button on IR remote, SCA51D enters in
standby mode, so do all HDMI source devices.
Press STANDBY button again on IR remote, SCA51D exits
standby mode, only the HDMI source device switched to
starts working.
CEC: on, Standby: off
Press STANDBY button on IR remote, SCA51D enters in
standby mode, HDMI 1~3 source devices keep on.
CEC: on
Use CEC function buttons,
▲
,
▼
,
,
and
OK
buttons on
IR remote to control HDMI source devices, include play,
pause, fast forward, fast reverse and operations in menu.
CEC: off
Unable to control HDMI source devices through IR remote
CEC: Control HDMI source devices by IR remote