V-MATRIX
5
INSTALLING YOUR VM2143VS
6
Step 1.
Slide the
VM2143VS
and the
VM2144VS
into available slots in the V-Matrix™
Enclosure. Make sure that the
VM2143VS
fits into place. Secure the card to the V-
Matrix™ by tightening the retainer screws
located on the top and bottom of each
cover plate.
Step 2.
Connect an output cable from the video
source to the input connector of the
VM2143VS
. Connect the output
connector of the
VM2144VS
to the display
devices through an input cable.
OPERATION
7
The
VM2143VS
will operate successfully as long
as the card is installed properly and other technical
specifications are followed.
TROUBLESHOOTING GUIDE
8
We have carefully tested and have found no
problems in the supplied
VM2143VS
; however, we
would like to offer suggestions for the following:
•
Make sure that power is connected to the
enclosure and also check to see if the
VM2143VS
is pushed in all the way.
•
Make sure that you have video sources
connected to compatible displays.
•
If the image quality is poor, please make sure
that a high quality of cables is used. We
recommend ALTINEX-made cables for best
results.
•
If there is problem with the
VM2143VS
please
call ALTINEX at (714) 990-2300.
