UT260-104
User’s Guide
400-0680-001
3
5. About Your UT260-104
Receive Audio/Video/Control up to 70m over one Cat 6/Cat
6A/Cat 7 cable
Support VGA with WUXGA resolution, HDMI 4k x 2K, DP 1.2
with 4K@30Hz
HDCP 1.4 compliant
IR and RS-232 pass through
Remote power from HDBT transmitter
Status LED on front
The UT260-104 HDBT Receiver is a high performance HDBT receiver
with HDMI output. In addition to video, the UT260-104 also allows both IR
and RS232 control signals from the transmitter to the receiver, or from
the receiver to the transmitter. The RS232 port is independently
configurable allowing different baud rates than the transmitter.
The TX+RX system supports manual or auto-switching modes, pass-through IR or RS232 controls, and custom audio selection.
Auto-switching automatically switches to the newest input. Manual control allows the switch to be controlled from user interface
momentary switches, RS232 protocols, or via the built-in web server. A special feature gives the user the ability to select between using
the embedded audio (HDMI/DP) or the external audio from the 3.5mm audio input port. The external audio is automatically selected
with the VGA input, but can also be used to override the HDMI or DP embedded audio.
A power supply is included with the UT260-104, or the UT260-104 receiver can be power by the UT260-103 transmitter when used with
a direct connection between the transmitter and receiver.
