UT260-102
User’s Guide
400-0476-001
9
7.
&SMx
Set Switching Mode
This command sets the switching mode of the switcher to
either automatic or manual.
Command Format: &SMx + <cr>
x
= Mode (A=auto, M=manual)
Example:
Set the switcher mode to automatic by sending the
following command:
&SMA <cr>
The switcher returns feedback:
(Auto Mode)
8.
?SPP
Query Priorities
This command enables and disable the output video form
the switcher.
Command Format: ?SPP + <cr>
Example:
Query the switcher for input priorities by sending the
following command:
?SPP <cr>
The switcher returns feedback:
(Priority [HA,HB,DP,VA])
default
9.
&SPP[a,b,c,d]
Set Priorities
This command sets the input priorities.
Command Format: &SPP[a,b,c,d] + <cr>
a
= Highest priority input
b
= Priority #2
c
= Priority #3
d
= Lowest priority input
Note: Due to an error is the current code release, the
inputs are mapped as follows:
Send
To Get
Send
To Get
DP
HA
HB
DP
VA
HB
HA
VA
Example:
Set the input priorities in descending order of HDMI-A,
HDMI-B, DisplayPort, and VGA by sending the following
command:
&SPP[DP,VA,HB<HA] <cr>
The switcher returns feedback:
(Priority [HA,HB,DP,VA])
10.
&FR
Factory Reset
This command enables and disable the output video form
the switcher.
Command Format: &FR + <cr>
Example:
Query the switcher for input priorities by sending the
following command:
?SPP <cr>
The switcher returns feedback:
(Restore the factory Settings)
Factory settings include:
Mode .............. Auto Mode
RS232 ............ 9600,N,8
Priorities ......... HA,HB,DP,VA
VGA EDID ...... Internal
DP EDID .......... External
HDMI EDID ...... External
11.
?EDID
Query EDID
This command returns the EDID settings of the switcher
inputs.
Command Format: ?EDID + <cr>
Example:
Read the switcher EDID settings by sending the following
command:
?EDID <cr>
The switcher returns feedback:
(EDID:internal, VGA)
(EDID:external, DP)
(EDID:external, HDMI)
12.
&EDIDx,y
Select EDID
This command sets the switching mode of the switcher to
either automatic or manual.
Command Format: &EDIDx,y + <cr>
x
= Type (def=default, ext=external, int=internal)
y
= Input (VGA, DP, or HDMI)
Example:
Set the VGA input to use the internal EDID by sending the
following command:
&EDIDint,VGA <cr>
The switcher returns feedback:
(EDID: internal, VGA)
