UT240-325S
User’s Guide
400-0594-001
3
5. About Your UT Interconnect
The Altinex UT240-325S Under-the-Table AV
Interconnect provides a wide variety of options
for routing computer audiovisual signals,
network connections, and AC power.
Under-the-table options are ideal for situations
where it is too expensive or impractical to install
the routing interface directly into the furniture.
The UT240-325S offers tabletop solutions with
trouble-free snap in keystone connectors. The
elegant design is low-profile and designed to fit
under the table offering a practical and easily
accessible user interface.
Each unit comes standard with 2 AC receptacles and factory configured keystone connectors. The UT240-325S connects to standard
AC power outlets through a single 9-10 ft. (2.7 to 3.0 m) power cord that is permanently attached to the unit. The power module is also
housed in an enclosure made of steel alloy which makes it a durable frame and remains lightweight as a whole unit.
The CAT-6 (RJ-45) connectors are snap-in style connectors that attach to a support bracket inside the faceplate. The connectors must
be “snapped” out of the bracket, wired to the CAT-5/6 cable, and then “snapped” back in. The UT240-325S also has blank slots that
allow for simple onsite customization with various keystones to choose from. Units have two female-to-female bulkhead connectors for
19-pin HDMI. The video receiving devices attach to the panel mount connectors accessible on the back of the unit allowing for easy and
secure connectivity. These units also have two 3.5 mm terminal blocks that allow for secure audio by adjusting captive screws on the
terminal sides.
UT240-325S shown here.
