Tilt ‘N Plug
Tilt ‘N Plug
Tilt ‘N Plug
Tilt ‘N Plug
User’s Guide
400-0521-001
10
7. Operation
7.1 Opening and Closing the TNP
The TNP510/TNP512 will open easily when the top is pressed down and
then released.
When the TNP510/TNP512 is not in use, simply press the top down until it
is level with the surface of the table and then release. The unit will remain
hidden until needed again.
7.2 Power/Signal Connections
Connect external devices to the appropriate connector on the
TNP510/TNP512. Remember, the devices plugged into the AC power
connectors should not draw more than 600W of power.
8. Troubleshooting Guide
The TNP510/TNP512 supplied was carefully tested and no problems were
detected. However, we would like to offer the following suggestions:
•
Please make sure that the highest quality network cables are used.
•
Make sure that no cable or power cord is damaged or pinched. If
there has been damage, do not use the TNP510/TNP512. Please call
the ALTINEX Customer Service Department at (714) 990-2300 to
have the unit repaired.
•
If the unit does not rise into position correctly, check the service
loops for the signal and power cords on the bottom of the unit.
