Tilt 'N Plug Jr. Interconnect Box
User’s Guide
400-0434-010
5
7. Operation
7.1 Opening and Closing the Tilt 'N Plug Jr.
The Tilt 'N Plug Jr. will open easily when the top is pressed down and then
released.
When the Tilt 'N Plug Jr. is not in use, simply press the top down until it is
level with the surface of the table and then release. The unit will remain
hidden until needed again.
7.2 Power/Signal Connections
Connect external devices to the appropriate connector on the Tilt 'N Plug Jr.
Remember, the devices plugged into the AC power connectors should not
draw more than 5A AC.
8. Troubleshooting Guide
The Tilt 'N Plug Jr. supplied was carefully tested and no problems were
detected. However, we would like to offer the following suggestions:
•
Please make sure that the highest quality network cables are used.
•
Make sure that no cable or power cord is damaged or pinched. If there
has been damage, do not use the Tilt 'N Plug Jr. Please call the ALTINEX
Customer Service Department at (714) 990-2300 to have the unit
repaired.
•
If the unit does not rise into position correctly, check the service loops
for the signal and power cords on the bottom of the unit.
