background image

                                                          MULTI-TASKER

2

PRECAUTIONS / SAFETY WARNINGS

1

Please read this manual carefully before using
your

 MT104-102

. Keep this manual handy for

future reference. These safety instructions are to
ensure the long life of your 

MT104-102 

and to

prevent fire and shock hazard. Please read them
carefully and heed all warnings.

1.1 GENERAL

  Qualified ALTINEX service personnel, or their

authorized representatives must perform all
service.

1.2 INSTALLATION

  To prevent fire or shock, do not expose this

unit to rain or moisture. Do not place the

MT104-102

 in direct sunlight, near heaters or

heat radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam
can harm internal components.

  Handle the 

MT104-102 

carefully. Dropping or

jarring can damage the card.

  Insert the card carefully into the slots of the

Multi-Tasker™ without bending any edges.

    When removing a card, please make sure that

the expansion card to which it is attached is
also pulled out simultaneously.

1.3 CLEANING

    Clean only the connector area with a dry cloth.

Never use strong detergents or solvents, such
as alcohol or thinner. Do not use a wet cloth or
water to clean the card. Do not clean or touch
any component or PCB.

1.4 FCC / CE NOTICE

  This device complies with part 15 of the FCC

Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.

  This equipment has been tested and found to

comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.

  Any changes or modifications to the unit not

expressly approved by ALTINEX, Inc. could
void the user’s authority to operate the
equipment.

Содержание MULTI-TASKER MT104-102













Отзывы: