SPECIAL APPLICATION
400-0430-001
2
PRECAUTIONS / SAFETY WARNINGS
1
Please read this manual carefully before using your
DA203-101
Line Driver. Keep this manual handy
for future reference. These safety instructions are
to ensure the long life of your
DA203-101
and to
prevent fire and shock hazard. Please read them
carefully and heed all warnings.
1.1 GENERAL
•
Unauthorized personnel shall not open the unit
since high-voltage components are inside.
•
Qualified ALTINEX service personnel, or its
authorized representative must perform all
service.
1.2 GUIDELINES FOR RACK-MOUNTING
•
Maximum operating temperature is 35°C.
•
Distribute the units evenly. Otherwise,
hazardous conditions may be created by an
uneven weight distribution.
•
Connect the unit to a properly rated supply
circuit.
•
Reliable
grounding of rack-mounted
equipment should be maintained.
1.3 INSTALLATION
•
For best results, place the
DA203-101
on a
flat, level surface in a dry area away from dust
and moisture.
•
To prevent fire or shock, do not expose this
unit to rain or moisture. Do not place the
DA203-101
in direct sunlight, near heaters or
heat-radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam
can harm internal components.
•
Handle the
DA203-101
carefully as dropping
or jarring can damage internal components.
•
Do not place heavy objects on top of the
DA203-101
.
•
To turn off the main power, be sure to remove
the cord from the power outlet. The outlet
should be installed as near to the equipment
as possible, and should be easily accessible.
•
Do not pull the power cord or any cable that is
attached to the
DA203-101
.
•
If the
DA203-101
is not used for an extended
period, disconnect the power cord from the
power outlet.
1.4 CLEANING
•
Unplug the
DA203-101
power cord before
cleaning. Clean surfaces with a dry cloth.
Never use strong detergents or solvents, such
as alcohol or thinner. Do not use a wet cloth or
water to clean the unit.
1.5 FCC / CE NOTICE
•
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
•
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at their
expense.
•
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could
void the user’s authority to operate the
equipment.
