background image

MATRIX SWITCHERS

1

INTRODUCTION

Thank you for purchasing a 

HOMERUN 

Series

Matrix

 

Switcher. We are sure you will find it to be

reliable and simple to use.

The

 HOMERUN 

Series Matrix Switchers are

designed using state-of-the-art technology and offer
a unique combination of features not available
anywhere else.

We are committed to providing our customers with
signal management solutions to the most
demanding audio-visual installations.

We appreciate your selection of our products and
are confident that you will join the ranks of our
many satisfied customers throughout the world.

This manual covers:

(

HOMERUN 

Series model no.)

HMAxxyy – VmAn
HMVxxyy – VmAn
HMRxxyy – VmAn

Where

HMA

Audio (Mono / Stereo) 

HOMERUN

Switcher

HMV

200MHz Video (Composite, S-Video &
Component) 

HOMERUN

 Switcher

HMR

300 MHz Video (High resolution
RGsB, RGBS, RGBHV) 

HOMERUN

Switcher

xx

number of inputs per each 

HOMERUN

Switcher module

yy

number of outputs per each

HOMERUN

 Switcher module

m

number of 

HOMERUN

 Video Switcher

modules in the system

n

number of 

HOMERUN

 Audio Switcher

modules in the system

TABLE OF CONTENTS

Page

PRECAUTIONS/SAFETY WARNINGS..................2

GENERAL ..........................................................2
INSTALLATION ..................................................2
RACK-MOUNT INSTALLATION .........................2
CLEANING .........................................................2
FCC NOTICE......................................................2

ABOUT YOUR 

HOMERUN

 MATRIX SWITCHER . 3

TECHNICAL SPECIFICATIONS ............................3

DIAGRAM OF FRONT/BACK PANEL....................4

APPLICATION DIAGRAM...................................... 6

INSTALLING YOUR SWITCHER...........................7

OPERATION..........................................................8

BACK PANEL MANUAL CONTROL ...................8
RS-232 CONTROL OF THE SWITCHER ...........9

CP-02

 

REMOTE TERMINAL CONTROL .......... 18

WINDOWS BASED CONTROL SOFTWARE ... 20

ACCESSORIES ...................................................21

FAQ (FREQUENTLY ASKED QUESTIONS) ....... 21

TROUBLESHOOTING GUIDE.............................22

ALTINEX POLICY................................................23

LIMITED WARRANTY ...................................... 23
RETURN POLICY.............................................23
CONTACT INFORMATION ..............................23

Содержание 400-0026-004

























Отзывы: