9
Installing your Built-in Oven
Bringing it all together
This appliance must be installed by a qualified electrician to comply with the relevant Institution of Engineering and
Technology (I.E.T.) regulations and also the local electricity supply company requirements.
WARNING
: THIS APPLIANCE MUST BE EARTHED
This appliance must be connected by a competent person, using fixed wiring via a double pole switched fused spur
outlet, protected by a 13A fuse.
We recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and
who will comply with the I.E.T. and local regulations. The wires in the mains lead are coloured in accordance with
the following code:
This appliance must not be connected to an ordinary domestic power point. The mains terminal is situated on the
back of the oven.
•
GREEN AND YELLOW = EARTH
•
BLUE = NEUTRAL
•
BROWN = LIVE.
As the colours of the wires in the mains
lead for the appliance may not correspond
with the coloured markings identifying the
terminals in your spur box, proceed as
follows:
1.
The wire which is coloured green and
yellow must be connected to the terminal
marked E (Earth) or coloured Green.
2.
The wire which is coloured blue must be
connected to the terminal marked N
(Neutral) or coloured Black.
3.
The wire which is coloured brown must
be connected to the terminal marked L
(Live) or coloured Red.
Connect the cable to the correct terminals.
Check that the links are correctly fitted and that
the terminal screws are tight. Secure the mains
cable using the cable clamp.
Ensure the cable route avoids the risk of
trapping or touching hot surfaces.
Current Operated Earth Leakage Breakers
Where the installation is protected by a 30mA
sensitivity residual current device (RCD), the combined
use of your appliance and other domestic appliances
may occasionally cause nuisance tripping. In these
instances, the kitchen circuit may need to be
reconfigured. This work should be carried out by a
qualified electrician.
