HDMI2.0 HDBaseT Extender
ALTIMIUM
output
only support PCM format.
device that support PCM format.
Cannot use
ARC function
ARC switcher is dialed to OFF
Dial the switcher to ON.
Devices or cables utilized don’t
support ARC
Change for devices/ cables that
support ARC
Cannot work as
an Ethernet
Switch. PCs
cannot connect
to the internet.
The DHCP switch of Router is
turned on, but the IP address of
PCs are static.
Recheck all PCs and set these
Pcs to use dynamic IP mode.
The DHCP switch of Router is
turned off, but the IP address of
PCs are dynamic.
Recheck all PCs and set these
Pcs to use static IP mode and
make sure the difference of IP
addresses to avoid IP address
conflict.
Network or server failure.
Please contact to your Internet
Service Provider.
Cannot use the
device
the device is broken
Send it to authorized dealer for
repairing.
If your problem persists after following the above troubleshooting steps, seek further
help from authorized dealer or our technical support.
