Introduction
The Altigo Neckband Earbuds offer an upgrade in comfort and sound to your everyday earbuds. Here’s how to get
the most out of them.
To download the complete manual visit altigoproducts.com
.
Power and Pair
Ensure your device’s Bluetooth® connection is on.
1. Press and hold the multi-function button for five seconds until the light flashes red and white, indicating the
earbuds are in pairing mode. The next time you turn on your earbuds, you only need to press and hold the
multi-function button for two to three seconds.
2. On your device, select “Altigo Neckband Earbud”. Complete any additional steps based on your device.
The LED will flash white every four seconds while your earbuds are on and paired.
3. To turn your earbuds off, press and hold the multi-function button for four seconds. The LED will flash red
until they are powered off.
Wireless Controls
The simple, built-in controls on your Altigo Neckband Earbuds let you fully enjoy your music on your own terms.
Button Functions:
Power/Play/Pause Button
• Quick press – Play/Pause/ Answer call/End Call
• Hold the multi-function button for 2 to 3 seconds for device voice assistant
• Long press – Power on/ Power off/ Deny Call
Plus Button
• Quick press – Volume up
• Hold – Track next song
Minus Button
• Quick press – Volume down
• Hold – Track previous song
Neckband Earbuds Instructions
Charge
To charge your earbuds, connect the micro USB end of the included charging cable to the port on the side of the
wireless control and the USB end to your preferred USB outlet. The LED will light red while charging and will turn
off when the earbuds are fully charged.
450-03757-A_Neckband_earbuds_QSG_010819.indd 2
1/11/19 11:26 AM
