Altigen Alti-IP 600 Скачать руководство пользователя страница 35

Страница: 35 / 65

Alti-IP 600 Manual

Use the buttons on the dial pad to enter the new TFTP server address,
using the * key to enter periods. Use the

(BACK key) to correct any

mistakes.

Press the ENTER button.

Updating Phone Firmware

Note:

If using TFTP Server Application, TFTPD32, included in the CD-
ROM, copy the following files —

tftpd32.exe

and <

hlp

files —to your local directory; once copied, you can launch the
TFTP Server application from the executable file.

Obtain

app_mid.bin

and

dsp.bin

files from the AltiGen

website and copy to your local directory.

Important:

When updating the Alti-IP 600 phone’s firmware, it is

recommended that administrators perform any updates after
normal business hours or when the IP phone is not in use. If the
Alti-IP 600 phone is in use during an update, the call will be
disconnected.

You must have a TFTP server to have the Alti-IP 600 to connect to in order
update the firmware.

If the Alti-IP 600 phone is registered with AltiServ, to update the phone
firmware from AltiAdmin:

Launch IP Phone Configuration in AltiAdmin Main Menu.

Set TFTP Server address.

Select Boot Download and Reset IP Phone check boxes, then click
Apply.

The Alti-IP 600H/600PH should reboot and download image from the
specified TFTP server.

To update the phone firmware directly from the Alti-IP 600 Phone:

Press * * 7, then press the ENTER button to access the Configuration
Menu.

Use

to scroll to

System

TFTP Server.

Enter TFTP server address.

The Alti-IP 600 will download the firmware from the TFTP on the next
reboot.

Содержание Alti-IP 600


































































Результаты поиска

Содержание Alti-IP 600

Отзывы:

Altigen Alti-IP 600, Руководство администратора, Страница: 35 / 65

Результаты поиска

Содержание Alti-IP 600

Отзывы: