Connect to home hub
ALTIBOX TV
1
This user guide describes how to connect the set-top box to the
home hub and TV and how to navigate using the remote control
and keyboard, the TV portal and services, along with a few
settings that can be useful to know
1.
From the home hub you set up the distribution network. You can
read more about this in the guide
’Excavation and cabling’. A wireless TV set up can replace Ether-
net cable between the set-top box and the home hub.
2.
The start package includes a 10 m network cable. If you need
further cables these are available from computer equipment sto-
res. Use an non-twisted network cable Cat. 5E or higher category,
between the home hub and the set-top box.
3.
You connect the cable from the home hub to the point where the
TV and set-top box are to be located. You connect the network
cable to the home hub in one of the ports marked Ethernet 2-4.
The network cable is then connected to the rear of the set-top box
in the socket marked ETHERNET. if you have more than three TVs,
you must use a single network switch that supports 100Mbps.
These are also available from computer equipment suppliers.
USB
FIBER
WAN
M2M
LAN1 LAN2 LAN3
TEL1 TEL2 RESET
STRØM AV/PÅ
WPS
3
