Alternate Energy Technologies AE-Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 12

Solar Collector Dimensions
Model No. AE-21 AE-24 AE-26 AE-28 AE-32 AE-40 MSC-21 MSC-24 MSC-26 MSC-28 MSC-32 MSC-40
Length ( l ) 85.187 97.187 77.187 85.187 97.187 121.187 86.125 98.125 78.125 86.125 98.125 122.125
Width ( w ) 35.187 35.187 47.187 47.187 47.187 47.187 35.875 35.875 47.875 47.875 47.875 47.875
Height ( h ) 3.137 3.137 3.137 3.137 3.137 3.137 3.082 3.082 3.082 3.082 3.082 3.082
Area 20.82 23.75 25.29 27.91 31.85 39.71 21.46 24.45 25.97 28.63 32.62 40.60
Weight 74 84 90 99 113 153 76 87 91 102 116 151
MOUNTING HARDWARE SPACING – Centerline to Centerline (in)
xx -MH
MSC-MH
86.187 98.187 78.187 86.187 98.187 122.187 88.233 100.233 80.233 88.233 100.233 124.233
xx -FM
MSC-RRM
88.663 100.663 80.663 88.663 100.663 122.663 87.375 99.375 79.375 87.375 99.375 12.375
xx -RM
MSC-RM
86.835 98.835 78.835 86.835 98.835 122.835 87.333 99.333 79.333 87.333 99.333 123.333
Dimensions shown (length, width and height) are nominal and listed in inches, area in ft² and weight in lbs. Use the formulas
below for tilted applications.
To calculate the length of the support strut use the formula as follows:
S = 2 x L x sin((

-

) ÷ 2)
Add two (2) inches to the calculated length to allow for the pre-drilled holes, positioned ± 1.0 in from each end
of the support strut.
To calculate the recommended spacing between collectors use the formula as follows:
X = L x cos(

–

) + L x sin(

–

) x tan(90 –

–

)
This would be spacing distance required to insure collectors do not shade one another in stacked arrays or saw-
tooth type mounting configurations.