AlterG Anti-Gravity Treadmill 400X Скачать руководство пользователя страница 24

Страница: 24 / 54

D000348-00 Rev. B

Session Metrics

The session screen gives you a graphical overview of body weight, speed, and inclines. It also includes

information on your average speed, calories burned, and total distance.

Session Metrics

The session metrics, by default, is displayed on the top portion of the screen. The session time, calories

burned, pace, distance traveled, and heart rate are displayed. Alternative layouts can be set in the facility

setting. For more information, see “Adjusting Display Layout – GUI Tab”.

Calories

The calorie count displayed takes into account your body weight percentage and treadmill speed, incline,

and distance. As a result, the calories burned reading is more accurate when compared to exercise

equipment that does not include these parameters.
Reference

http://42.195km.net/e/treadsim/

for more information on how the Via 400 calculates calories

burned.

Heart Rate Monitoring

Heart Rate Monitor

The Anti-Gravity Treadmill display is designed to receive a user’s heart rate in conjunction with the use of a

Polar

(Chest Strap) Heart Rate Monitor.

Polar chest straps can be purchased at most popular sporting

goods stores or online. For the screen to correctly display a user’s heart rate, the receiver within the display

must obtain a stable heart rate signal from the Polar transmitter. The Polar Heart Rate System consists of

two elements, 1) the sensor/transmitter and 2) the receiver within the Anti-Gravity Treadmill display.

Polar

is a registered trademark of Polar Electro, Inc. Lake Success, NY

Содержание Anti-Gravity Treadmill 400X























































Результаты поиска

Содержание Anti-Gravity Treadmill 400X

Отзывы:

AlterG Anti-Gravity Treadmill 400X, Руководство пользователя, Страница: 24 / 54

Результаты поиска

Содержание Anti-Gravity Treadmill 400X

Отзывы: