-
04
-
-
03
-
Power
Fault display
Multifunction
Speed unit
Speed
Gear
LED display
Instructions of buttons
Note: When the brake is active, pressing the throttle button to
accelerate is invalid!
Product introduction
Rear wheel brake
Front wheel brake
Kickstand
Headlight
Front Wheel
Tail lights
Fender
Motor
Plate
LED Display
Light &
Function key
Power button
Frame
Handlebar
Hook
Folding clasp
Reflector
Anti-slip pedal
Battery unlock screw
Throttle button
Pole
1.
Power Switch:
Long press the power button to turn on/off.
2.
Function key:
A:
Short press the function key once: Cycle to switch gears.
Pedestrian mode: Gear indicator is not displayed.
The pedestrian indicator flashes in breathing state.
Normal mode: Gear indicator shows white.
Sports mode: Gear indicator shows red.
B:
Short press the function key twice: turn on / off the front and rear lights.
When the front lights are on, the taillights are always on.
3.
Accelerator:
Press throttle button to start and accelerate.
4.
Brake:
Hold the brake handle to brake. Lightly step on the rear fender to assist
the brakes.
5.
Cruise mode:
after the constant speed cruise function is turned on, maintain
the current vehicle speed for 6 seconds (vehicle speed ≥ 6km / h).Enter the
cruise mode automatically, and exit the cruise mode when pressing the
acceleration dial again or holding the brake firmly.
